Menu
PAC II Hood

DESIGN – TWO PIECE with NOTCHED SHOULDER

HEAD DESIGN

LAYERS: 2 ply
LENGTH: From top of head to neck:  13 inches
WIDTH: Back seam to top of face:  9 inches
Back seam to bottom of head:  11inches
SIZING: One size fits all (universal size).  Do not modify, change, or alter your protective hood in any manner.

BIB DESIGN

LAYERS: 2 ply
LENGTH: 8 inches (front and back)
NOTCHED SHOULDER DESIGN: From top of head to bottom of notched shoulder:  15 inches

OVERALL HOOD LENGTH: From top of head to bottom of apron:  21 inches

FACE OPENING MEASUREMENTS- Face opening is sewn with ½ inch elastic.
RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
STRETCHED: 15 inches


PAC II Style Hood

Two Piece 100% Nomex thread, with Notched Shoulder Insert.
Meets or Exceeds NFPA 1971-2007 Edition & is UL Certified.

CONSTRUCTION

SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability.  All bottom edges are bound with binding.
THREAD: 100% Nomex

CARE

Machine wash warm with regular detergent – no chlorine bleach.  Tumble dry low heat
DO NOT commercially dry clean

CERTIFICATION

Meets or exceeds NFPA 1971-2007 Edition and is UL Certified.  Meets or exceeds Cal/OSHA Standards.

All weights and measurements are approximate.

WARRANTY INFORMATION
Your protective hood is warranted by the manufacturer to be free from defects in material and workmanship.  This warranty does not cover normal wear or unusual exposures.  This warranty is in lieu of all other warranties, express or implied, including but not limited to, implied warranties or marketability and / or fitness for a particular purpose.  The manufacturer shall not be liable for incidental or consequential damages.
Other colors available