Menu
PAC IA Hood

DESIGN – ONE PIECE with NOTCHED SHOULDER

LAYERS: 2 ply *
LENGTH: From top of head to bottom:  18 inches
WIDTH: Back seam to top of face:  9 inches
Back seam to bottom of head:  10 inches
SIZING: One size fits all.  Do not modify, change, or alter your protective hood in any manner.

FACE OPENING MEASUREMENTS

RELAXED: 5 inches (UL requirement 4.7-5.7 inches)
STRETCHED: 15 inches
Face opening is sewn with ½ inch elastic.

OVERALL HOOD LENGTH: From top of head to bottom of apron:  18 inches

PAC IA Style Hood
One Piece 100% Nomex thread, with Notched Shoulder.
Meets or Exceeds NFPA 1971-2007 Edition & is UL Certified.

CONSTRUCTION

SEAMS: All seams are merrow stitched then top and bottom covered with a 5-thread cover stitch for extended durability.  All bottom edges are bound with binding.
THREAD: 100% Nomex

CARE

Machine wash warm with regular detergent – no chlorine bleach
Tumble dry low heat
DO NOT commercially dry clean

CERTIFICATION

Meets or exceeds NFPA 1971-2007 Edition and is UL Certified.  Meets or exceeds Cal/OSHA Standards.

All weights and measurements are approximate.

WARRANTY INFORMATION
Your protective hood is warranted by the manufacturer to be free from defects in material and workmanship.  This warranty does not cover normal wear or unusual exposures.  This warranty is in lieu of all other warranties, express or implied, including but not limited to, implied warranties or marketability and / or fitness for a particular purpose.  The manufacturer shall not be liable for incidental or consequential damages.
Other colors available